Out of stock
SKU
MJC-CS-RD
MJC-CS-RD Flexible Coupling - Jaw-Type - Clamping Type
| High Torque High-precision Cutting work |
HK$0.00
Dimension Drawing
Specs/
UNIT :INCH
| Part Number | A | L | W | B | C＊1 | F | G | M | Wrench |
| Torque | |||||||||
| (lbf in.) | |||||||||
| MJC-14CS-RD | 0.551 | 0.276 | 0.866 | 0.236 | 0.039 | 0.138 | 0.157 | M2 | 4.43 |
| 0.197 | M1.6 | ||||||||
| MJC-20CS-RD | 0.787 | 0.394 | 1.181 | 0.315 | 0.039 | 0.197 | 0.256 | M2.5 | 8.85 |
| 0.295 | M2 | ||||||||
| MJC-30CS-RD | 1.181 | 0.433 | 1.378 | 0.394 | 0.059 | 0.217 | 0.394 | M4 | 30.98 |
| 0.433 | M3 | ||||||||
| MJC-40CS-RD | 1.575 | 0.984 | 2.598 | 0.472 | 0.079 | 0.335 | 0.551 | M5 | 70.8 |
| 0.62 | M4 | ||||||||
| MJC-55CS-RD | 2.165 | 1.181 | 3.071 | 0.551 | 0.079 | 0.413 | 0.787 | M6 | 115.05 |
| 0.827 | M5 | ||||||||
| MJC-65CS-RD | 2.559 | 1.378 | 3.543 | 0.591 | 0.098 | 0.512 | 0.945 | M8 | 247.8 |
| 0.984 | M6 | ||||||||
| MJC-80CS-RD | 3.15 | 1.772 | 4.488 | 0.709 | 0.118 | 0.591 | 1.181 | M8 | 247.8 |
| 1.22 | |||||||||
| MJC-95CS-RD | 3.74 | 1.969 | 4.961 | 0.787 | 0.118 | 0.709 | 1.339 | M10 | 486.75 |
| 1.417 | |||||||||
| ＊1： Use with C Dimension | |||||||||
| Part Number | Max. Bore Diameter | Rated | Max. | Max. | Moment | Static | Max. Lateral Misalignment | Max. Angular Misalignment | Max. Axial Misalignment | Sleeve Hardness | Mass＊2 |
| (mm) | Torque＊1 | Torque＊1 | Rotational | of | Torsional | (in.) | (°) | (in.) | (oz) | ||
| (lbf in.) | (lbf in.) | (min-1) | Inertia＊2 | Stiffness | |||||||
| (oz. in.2) | (lbf in./deg) | ||||||||||
| MJC-14CS-RD | 7 | 17.7 | 35.4 | 45000 | 0.01 | 3.4 | 0.004 | 1 | 0～+ 0.024 | A98 | 0.22 |
| MJC-20CS-RD | 11 | 44.25 | 88.5 | 31000 | 0.055 | 8.5 | 0.004 | 1 | 0～+ 0.031 | A98 | 0.56 |
| MJC-30CS-RD | 16 | 110.63 | 221.25 | 21000 | 0.328 | 20.08 | 0.004 | 1 | 0～+ 0.039 | A98 | 1.48 |
| MJC-40CS-RD | 25 | 150.45 | 300.9 | 15000 | 1.968 | 185.35 | 0.004 | 1 | 0～+ 0.047 | A98 | 4.59 |
| MJC-55CS-RD | 32 | 531 | 1062 | 11000 | 8.748 | 401.6 | 0.004 | 1 | 0～+ 0.055 | A98 | 10.93 |
| MJC-65CS-RD | 38.1 | 1416 | 2832 | 9000 | 19.136 | 756.85 | 0.004 | 1 | 0～+ 0.059 | A98 | 17.64 |
| MJC-80CS-RD | 45 | 2876.25 | 5752.5 | 7000 | 54.675 | 1003.99 | 0.004 | 1 | 0～+ 0.071 | A98 | 35.27 |
| MJC-95CS-RD | 55 | 3982.5 | 7965 | 6000 | 125.752 | 1374.69 | 0.004 | 1 | 0～+ 0.079 | A98 | 56.43 |
| ＊1： Correction of rated torque and max. torque due to load fluctuation is not required.However, if ambient temperature exceeds 30°C, be sure to correct the rated torque and max. torque with temperature correction factor shown in the table.MJC-CS's allowable operating temperature is -20°C to 60°C. | |||||||||||
| ＊2： These are values with max. bore diameter. | |||||||||||
More Information
Model number
N/A
Material
Aluminum Alloy
Characteristics
High Torque High-precision Cutting work
Color
N/A
Write Your Own Review