Out of stock
SKU
MJC-CSK-GR

MJC-CSK-GR Flexible Coupling - Jaw-Type - Clamping + Key Type

High Torque
High-precision Cutting work

HK$0.00

Dimension Drawing

MJC-CSK-GRFlexible Coupling - Jaw-Type - Clamping + Key Type寸法図

MJC-CSK-GRFlexible Coupling - Jaw-Type - Clamping + Key Type寸法図

MJC-CSK-GRFlexible Coupling - Jaw-Type - Clamping + Key Type寸法図

Specs/CAD

unit:inch

Part Number A L W B C* F G M Wrench
Torque
(lbf in.)
MJC-30CSK-GR 1.181 0.433 1.378 0.394 0.059 0.217 0.394 M4 30.98
0.433 M3 13.27
MJC-40CSK-GR 1.575 0.984 2.598 0.472 0.079 0.335 0.551 M5 70.8
0.62 M4 30.98
MJC-55CSK-GR 2.165 1.181 3.071 0.551 0.079 0.413 0.787 M6 115.05
0.827 M5 70.8
MJC-65CSK-GR 2.559 1.378 3.543 0.591 0.098 0.512 0.945 M8 247.8
0.984 M6 115.05
MJC-80CSK-GR 3.15 1.772 4.488 0.709 0.118 0.591 1.181 M8 247.8
1.22
MJC-95CSK-GR 3.74 1.969 4.961 0.787 0.118 0.709 1.339 M10 486.75
1.417

* Use with C Dimension

Part Number Max. Bore Diameter Rated Max. Max. Moment Static Max. Lateral Misalignment Max. Angular Misalignment Max. Axial Misalignment Sleeve Hardness Mass**
(mm) Torque* Torque* Rotational of Torsional (in.) (°) (in.) (oz)
  (lbf in.) (lbf in.) (min-1) Inertia**  Stiffness        
        (oz. in.2) (lbf in./deg)        
MJC-30CSK-GR 16 141.6 283.2 21000 0.323 30.89 0.003 1 0~+ 0.039 D64 1.45
MJC-40CSK-GR 25 185.85 371.7 15000 1.914 463.38 0.003 1 0~+ 0.047 D64 4.59
MJC-55CSK-GR 32 663.75 1327.5 11000 8.201 1390.14 0.003 1 0~+ 0.055 D64 10.58
MJC-65CSK-GR 38.1 1770 3540 9000 19.136 2007.98 0.003 1 0~+ 0.059 D64 17.28
MJC-80CSK-GR 45 3584.25 7168.5 7000 54.675 2162.44 0.003 1 0~+ 0.071 D64 34.92
MJC-95CSK-GR 55 4956 9912 6000 125.752 2316.9 0.003 1 0~+ 0.079 D64 52.91

* Correction of rated torque and max. torque due to load fluctuation is not required.However, if ambient temperature exceeds 30°C, be sure to correct the rated torque and max. torque with temperature correction factor shown in the table.MJC-CSK's allowable operating temperature is -20°C to 60°C.
** These are values with max. bore diameter.

Part Number
Standard Bore Diameter
D1・D2
10 11 12 14 15 16 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50 55
MJC-30CSK-GR                                  
MJC-40CSK-GR                      
MJC-55CSK-GR                
MJC-65CSK-GR                  
MJC-80CSK-GR                      
MJC-95CSK-GR                      
Part Number Standard Bore Diameter
D1・D2
1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4
MJC-30CSK-GR                        
MJC-40CSK-GR                    
MJC-55CSK-GR            
MJC-65CSK-GR    
MJC-80CSK-GR        
MJC-95CSK-GR                
All products are provided with hex socket head cap screw.
Recommended dimensional allowances of applicable shaft diameter are h6 and h7.
A set of hubs with clamping + key type for one side and clamping type or other type for the other side is available upon request.
In case of mounting on D-cut shaft, be careful about the position of the D-cut surface of the shaft.⇒Mounting and Maintenance
More Information
Model number
N/A
Material
Aluminum Alloy
Characteristics
High Torque High-precision Cutting work
Color
N/A
Write Your Own Review
You're reviewing:MJC-CSK-GR Flexible Coupling - Jaw-Type - Clamping + Key Type
Your Rating
To Top