Out of stock
SKU
MJS-CS-RD

MJS-CS-RD Flexible Coupling -Jaw-Type (Short) - Clamping Type

High Torque
Vibration Absorption
Electrical Insulation

HK$0.00

Dimension Drawing

MJS-CS-RDFlexible Coupling -Jaw-Type (Short) - Clamping Type寸法図

MJS-CS-RDFlexible Coupling -Jaw-Type (Short) - Clamping Type寸法図

Specs/CAD

unit:inch

Part Number A L W B C F G M Wrench
Torque
(lbf in.)
MJS-20CS-RD 0.787 0.276 0.945 0.315 0.039 0.138 0.256 M2.5 8.85
MJS-30CS-RD 1.181 0.374 1.26 0.394 0.059 0.187 0.394 M4 30.98
0.433 M3 13.27
MJS-40CS-RD 1.575 0.669 1.969 0.472 0.079 0.335 0.551 M5 70.8
0.62 M4 30.98
MJS-55CS-RD 2.165 0.709 2.126 0.551 0.079 0.354 0.787 M6 115.05
0.827 M5 70.8
MJS-65CS-RD 2.559 0.827 2.441 0.591 0.098 0.413 0.945 M8 247.8
0.984 M6 115.05
Part Number Max. Bore Diameter Rated Max. Backlash Zero Allowable Transmission Torque(lbf in.)*3 Max. Moment Static Max. Lateral Misalignment Max. Angular Misalignment Max. Axial Misalignment Sleeve Hardness Mass*2
(mm) Torque*1 Torque*1 Rotational of Torsional (in.) (°) (in.) (oz)
  (lbf in.) (lbf in.) (min-1) Inertia*2  Stiffness        
        (oz. in.2) (lbf in./deg)        
MJS-20CS-RD 8 44.25 88.5 1.77 31000 0.046 8.5 0.004 1 0~+ 0.031 A98 0.53
MJS-30CS-RD 16 110.63 221.25 4.43 21000 0.301 20.08 0.004 1 0~+ 0.039 A98 1.38
MJS-40CS-RD 25 150.45 300.9 10.62 15000 1.476 185.35 0.004 1 0~+0.047 A98 3.53
MJS-55CS-RD 32 531 1062 - 11000 6.014 401.6 0.004 1 0~+0.055 A98 7.41
MJS-65CS-RD 38 1416 2832 - 9000 13.122 756.85 0.004 1 0~+0.059 A98 11.99

*1: Correction of rated torque and max. torque due to load fluctuation is not required.However, if ambient temperature exceeds 30°C, be sure to correct the rated torque and max. torque with temperature correction factor shown in the table.MJC's allowable operating temperature is -20°C to 60°C.
*2: These are values with max. bore diameter.
*3: For transmission of backlash0Zero, please use a tight fit sleeve.

Part Number Standard bore diameter D1-D2
3 4 4.5 5 6 6.35 7 8 9.525 10 11 12 14 15 16 18 19 20 22 24 25 28 30 32 35 38
MJS-20CS-RD - - - - - - - - - - - - - - - - - -
MJS-30CS-RD - - - - - - - - - - - - - - -
MJS-40CS-RD - - - - - - - - - - - -
MJS-55CS-RD - - - - - - - - - - -
MJS-65CS-RD - - - - - - - - - - - -

●All products are provided with hex socket head cap screw.
●Recommended dimensional allowances of applicable shaft diameter are h6 and h7.
●A set of hubs with clamping type for one side and clamping + key type for the other side is available upon request.
●In case of mounting on D-cut shaft, be careful about the position of the D-cut surface of the shaft.

More Information
Model number
N/A
Material
Aluminum Alloy
Characteristics
High Torque Vibration Absorption Electrical Insulation
Color
N/A
Write Your Own Review
You're reviewing:MJS-CS-RD Flexible Coupling -Jaw-Type (Short) - Clamping Type
Your Rating
To Top