Out of stock
SKU
MJS-CSK-BL

MJS-CSK-BL Flexible Coupling - Jaw-Type (Short) - Clamping + Key Type

High Torque
Vibration Absorption
Electrical Insulation

HK$0.00

Dimension Drawing

MJS-CSK-BLFlexible Coupling - Jaw-Type (Short) - Clamping + Key Type寸法図

MJS-CSK-BLFlexible Coupling - Jaw-Type (Short) - Clamping + Key Type寸法図

Specs/CAD

unit:inch

Part Number A L W B C F G M Wrench
Torque
(lbf in.)
MJS-30CSK-BL 1.181 0.374 1.26 0.394 0.059 0.187 0.394 M4 30.98
0.433 M3 13.27
MJS-40CSK-BL 1.575 0.669 1.969 0.472 0.079 0.335 0.551 M5 70.8
0.62 M4 30.98
MJS-55CSK-BL 2.165 0.709 2.126 0.551 0.079 0.354 0.787 M6 115.05
0.827 M5 70.8
MJS-65CSK-BL 2.559 0.827 2.441 0.591 0.098 0.413 0.945 M8 247.8
0.984 M6 115.05
Part Number Max. Bore Diameter Rated Max. Backlash Zero Allowable Transmission Torque(lbf in.)*3 Max. Moment Static Max. Lateral Misalignment Max. Angular Misalignment Max. Axial Misalignment Sleeve Hardness Mass*2
(mm) Torque*1 Torque*1 Rotational of Torsional (in.) (°) (in.) (oz)
  (lbf in.) (lbf in.) (min-1) Inertia*2  Stiffness        
        (oz. in.2) (lbf in./deg)        
MJS-30CSK-BL 16 35.4 70.8 4.43 21000 0.295 7.11 0.008 1 0~+ 0.039 A80 1.34
MJS-40CSK-BL 25 43.37 86.73 10.62 15000 1.476 58.69 0.006 1 0~+0.047 A80 3.39
MJS-55CSK-BL 32 150.45 300.9 - 11000 5.467 216.24 0.008 1 0~+0.055 A80 7.41
MJS-65CSK-BL 38 407.1 814.2 - 9000 12.575 432.49 0.008 1 0~+0.059 A80 11.64

*1: Correction of rated torque and max. torque due to load fluctuation is not required.However, if ambient temperature exceeds 30°C, be sure to correct the rated torque and max. torque with temperature correction factor shown in the table.MJC's allowable operating temperature is -20°C to 60°C.
*2: These are values with max. bore diameter.
*3: For transmission of backlash0Zero, please use a tight fit sleeve.

Part Number Standard bore diameter D1-D2
10 11 12 14 15 16 18 19 20 22 24 25 28 30 32 35 38
MJS-30CSK-BL - - - - - - - - - - -
MJS-40CSK-BL - - - - -
MJS-55CSK-BL - -
MJS-65CSK-BL - - -

●All products are provided with hex socket head cap screw.
●Recommended dimensional allowances of applicable shaft diameter are h6 and h7.
●A set of hubs with clamping type for one side and clamping + key type for the other side is available upon request.
●In case of mounting on D-cut shaft, be careful about the position of the D-cut surface of the shaft.

More Information
Model number
N/A
Material
Aluminum Alloy
Characteristics
High Torque Vibration Absorption Electrical Insulation
Color
N/A
Write Your Own Review
You're reviewing:MJS-CSK-BL Flexible Coupling - Jaw-Type (Short) - Clamping + Key Type
Your Rating
To Top