Out of stock
SKU
MJC-BL
MJC-BL Flexible Coupling - Jaw-Type - Set Screw Type
High Torque High-precision Cutting work
HK$0.00
Out of stock
High Torque High-precision Cutting work
Dimension Drawing
Specs
inch
| Part Number | A | L | W | B | C＊1 | F | M | Wrench | Standard bore diameter |
| Torque | D1-D2 | ||||||||
| (lbf in.) | |||||||||
| MJC-14-BL | 0.551 | 0.276 | 0.866 | 0.236 | 0.039 | 0.138 | M3 | 6.19 | - |
| MJC-20-BL | 0.787 | 0.394 | 1.181 | 0.315 | 0.039 | 0.197 | M3 | 6.19 | - |
| MJC-30-BL | 1.181 | 0.433 | 1.378 | 0.394 | 0.059 | 0.217 | M4 | 15.04 | - |
| MJC-40-BL | 1.575 | 0.984 | 2.598 | 0.472 | 0.079 | 0.492 | M5 | 35.4 | - |
| MJC-55-BL | 2.165 | 1.181 | 3.071 | 0.551 | 0.079 | 0.591 | M6 | 61.95 | - |
| MJC-65-BL | 2.559 | 1.378 | 3.543 | 0.591 | 0.098 | 0.689 | M8 | 132.75 | - |
| MJC-80-BL | 3.15 | 1.772 | 4.488 | 0.709 | 0.118 | 0.886 | M8 | 132.75 | - |
| MJC-95-BL | 3.74 | 1.969 | 4.961 | 0.787 | 0.118 | 0.984 | M8 | 132.75 | - |
＊1： Use with C Dimension
| Part Number | Max. Bore Diameter | Rated | Max. | Max. | Moment | Static | Max. Lateral Misalignment | Max. Angular Misalignment | Max. Axial Misalignment | Sleeve Hardness | Mass＊2 |
| (mm) | Torque＊1 | Torque＊1 | Rotational | of | Torsional | (in.) | (°) | (in.) | (oz) | ||
| (lbf in.) | (lbf in.) | (min-1) | Inertia＊2 | Stiffness | |||||||
| (oz. in.2) | (lbf in./deg) | ||||||||||
| MJC-14-BL | 7 | 6.19 | 12.39 | 45000 | 0.011 | 1.24 | 0.006 | 1 | 0～+ 0.024 | A80 | 0.23 |
| MJC-20-BL | 11 | 15.93 | 31.86 | 31000 | 0.06 | 2.47 | 0.008 | 1 | 0～+ 0.031 | A80 | 0.6 |
| MJC-30-BL | 16 | 35.4 | 70.8 | 21000 | 0.339 | 7.11 | 0.008 | 1 | 0～+ 0.039 | A80 | 1.55 |
| MJC-40-BL | 25 | 43.37 | 86.73 | 15000 | 2.023 | 58.69 | 0.006 | 1 | 0～+ 0.047 | A80 | 4.59 |
| MJC-55-BL | 32 | 150.45 | 300.9 | 11000 | 8.748 | 216.24 | 0.008 | 1 | 0～+ 0.055 | A80 | 11.29 |
| MJC-65-BL | 38.1 | 407.1 | 814.2 | 9000 | 19.683 | 432.49 | 0.008 | 1 | 0～+ 0.059 | A80 | 18.34 |
| MJC-80-BL | 45 | 840.75 | 1681.5 | 7000 | 60.142 | 494.27 | 0.008 | 1 | 0～+ 0.071 | A80 | 35.27 |
| MJC-95-BL | 55 | 1150.5 | 2301 | 6000 | 125.752 | 556.06 | 0.008 | 1 | 0～+ 0.079 | A80 | 52.91 |
＊1： Correction of rated torque and max. torque due to load fluctuation is not required.However, if ambient temperature exceeds 30°C, be sure to correct the rated torque and max. torque with temperature correction factor shown in the table.MJC's allowable operating temperature is -20°C to 60°C.
＊2： These are values with max. bore diameter.
＊2： These are values with max. bore diameter.
| Model number | N/A |
|---|---|
| Material | Aluminum Alloy |
| Characteristics | High Torque High-precision Cutting work |
| Color | N/A |