MOR Flexible Coupling - Oldham - Type - Set Screw Type

High Allowable Misalignment
High Torque

HK$0.00

Out of stock

High Allowable Misalignment
High Torque

Description

Dimension Drawing

Specs

UNIT:INCH

Part Number	A	L	W	E	F	M	Wrench
							Torque
							(lbf in.)
MOR-6	0.236	0.098	0.331	0.083	0.051	M2	2.66
MOR-8	0.315	0.098	0.378	0.122	0.051	M2	2.66
MOR-10	0.394	0.114	0.409	0.161	0.055	M2	2.66
MOR-12	0.472	0.154	0.567	0.205	0.079	M3	6.19
MOR-15	0.591	0.173	0.63	0.323	0.087	M3	6.19
MOR-17	0.669	0.193	0.776	0.323	0.098	M3	6.19
MOR-20	0.787	0.228	0.85	0.48	0.114	M4	15.04
MOR-26	1.024	0.287	1.008	0.559	0.146	M4	15.04
MOR-30	1.181	0.394	1.283	0.638	0.197	M4	15.04
MOR-34	1.339	0.437	1.339	0.638	0.22	M5	35.4
MOR-38	1.496	0.476	1.579	0.799	0.24	M5	35.4
MOR-45	1.772	0.543	1.811	0.878	0.272	M6	61.95
MOR-55	2.165	0.736	2.244	1.043	0.37	M8	132.75
MOR-68	2.677	0.945	3.031	1.516	0.472	M10	265.5

Part Number	Max. Bore Diameter	Rated	Max.	Max.	Moment	Static	Max. Lateral Misalignment	Max. Angular Misalignment	Mass＊2
	(mm)	Torque＊1	Torque＊1	Rotational	of	Torsional	(in.)	(°)	(oz)
		(lbf in.)	(lbf in.)	(min-1)	Inertia＊2	Stiffness
					(oz. in.2)	(lbf in./deg)
MOR-6	2	1.77	3.54	100000	0	0.77	0.02	3	0.01
MOR-8	3	4.43	8.85	78000	0	1.85	0.028	3	0.03
MOR-10	4	7.08	14.16	63000	0.001	3.55	0.035	3	0.04
MOR-12	5	8.85	17.7	52000	0.003	9.27	0.039	3	0.11
MOR-15	8	14.16	28.32	42000	0.008	12.36	0.039	3	0.14
MOR-17	8	19.47	38.94	37000	0.015	18.54	0.047	3	0.25
MOR-20	12	28.32	56.64	31000	0.031	18.54	0.047	3	0.32
MOR-26	14	53.1	106.2	24000	0.115	46.34	0.059	3	0.71
MOR-30	16	132.75	265.5	21000	0.295	81.86	0.079	3	1.34
MOR-34	16	141.6	283.2	18000	0.498	154.46	0.098	3	1.83
MOR-38	20	247.8	495.6	16000	0.875	231.69	0.098	3	2.43
MOR-45	22	265.5	531	14000	1.804	370.7	0.118	3	3.88
MOR-55	26	398.25	796.5	11000	5.467	633.29	0.157	3	8.11
MOR-68	38	708	1416	9000	20.23	988.54	0.177	3	15.17

＊1：　Values with no load fluctuation and rotation in a single direction. If there is large load fluctuation, or both normal and reverse rotation, select a size with some margin. If ambient temperature exceeds 30°C, be sure to correct the rated torque and max. torque with temperature correction factor shown in the following table. The allowable operating temperature of MOR is -20°C to 80°C.
＊2：　These are values with max. bore diameter.

More Information

More Information
Model number	N/A
Material	Aluminum Alloy
Characteristics	High Allowable Misalignment High Torque
Color	N/A