Out of stock
SKU
MSXP-C-W-SP

MSXP-C-W-SP Couplings for Vacuum Variable Capacitor - Slit-Type (PEEK) - Clamping Type

Coupling for Vacuum Variable Capacitor
HK$0.00
Out of stock

Coupling for Vacuum Variable Capacitor
Description

Dimension Drawing

Specs

unit:inch

Part Number A L W F G M D1 D2 Screw Tightening 
Torque(lbf in.)
MSXP-25C-W40-5-6.35-SP3 0.984 0.449 1.575 0.177 0.354 M3 5 6.35 5.31
●All products are provided with hex socket head cap screw.
Part Number Rated torque*1 Max. Rotational Moment of Static Torsional Max. Lateral Max. Angular Max. Axial Mass
(lbf in.) Frequency Inertia Stiffness Misalignment Misalignment Misalignment (oz)
(min-1) (oz. in.2) (lbf in./deg) (in.) (°) (in.)
MSXP-25C-W40-5-6.35-SP3 11.51 6000 0.104 7.72 0.012 1.2 ±0.013 0.81
*1: Correction of rated torque and max. torque due to load fluctuation is not required. For details, refer to the Selection Procedure.

Material/Finish

MSXP-C-W-SP
Main unit PEEK (Polyether ether ketone)
Hex Socket Head Cap Screw SUSXM7

Structure

Characteristics

  • This is a resin spring coupling with single-piece construction. A slit is inserted into a cylindrical material.
  • PEEK superior in physical properties and electrical insulation is adopted.
  • A plate spring formed by a slit allows eccentricity, argument, and end-play to be accepted.

Property

MSXP-C-W-SP
Zero Backlash
Allowable Misalignment
Electrical Insulation
Allowable Operating Temperature -20°C to 120°C

Application

High frequency power / Matching box

Precautions for Use

Mounting on D-cut Shaft

In principle, use a round shaft. 
If a D-cut shaft is used, an excessive load due to tightening by the hex socket head cap screw may damage the coupling, depending on the mounting position of the D-cut surface of the shaft. 
When using a D-cut shaft, mount so that the D-cut surface of the shaft avoids contact with the coupling slit as much as possible.



More Information
More Information
Model number N/A
Material PEEK
Characteristics Coupling for Vacuum Variable Capacitor
Color N/A