XGL-C Flexible Coupling

对应高减衰能
高吸收振动
零背隙

HK$0.00

Out of stock

对应高减衰能
高吸收振动
零背隙

Description

Dimension Drawing

Specs

mm inch

Part Number	A	L	W	F	G	M	Wrench	Standard bore diameter D1-D2
							Torque
							(lbf in.)
XGL-15C	0.591	0.256	1.181	0.085	0.197	M1.6	2.21
XGL-19C	0.748	0.303	1.339	0.104	0.256	M2	4.43
XGL-25C	0.984	0.374	1.654	0.128	0.354	M2.5	8.85
XGL-30C	1.181	0.433	1.654	0.157	0.433	M3	13.27
XGL-34C	1.339	0.472	1.732	0.157	0.482	M3	13.27
XGL-39C	1.535	0.61	2.165	0.177	0.571	M4	22.13

Part Number	Max. Bore Diameter (mm)	Keyway Additional Modification Max. Bore Diameter (mm)	Rated Torque＊1 (lbf in.)	Max. Rotational (min-1)	Moment of Inertia＊2 (oz. in.2)	Static Torsional Stiffness (lbf in./deg)	Max. Lateral Misalignment (in.)	Max. Angular Misalignment (°)	Max. Axial Misalignment (in.)	Mass＊2 (oz)



XGL-15C	6	-	9.74	42000	0.018	4.94	0.006	1.5	±0.008	0.39
XGL-19C	8	6	18.59	33000	0.053	11.89	0.006	1.5	±0.008	0.67
XGL-25C	12	9	35.4	25000	0.191	20.08	0.006	1.5	±0.008	1.34
XGL-30C	15	11	55.76	21000	0.399	30.89	0.008	1.5	±0.012	1.87
XGL-34C	16	12	70.8	18000	0.711	43.25	0.008	1.5	±0.012	2.57
XGL-39C	20	15	119.48	16000	1.531	69.51	0.008	1.5	±0.012	4.13

＊1：　Adjustment of rated and max. torque specifications for load fluctuations is not required.
However, if operating temperature exceeds 30℃, please adjust rated torque and max. torque as detailed in the table below.
The operational temperature range for XGT is -20℃ to 80℃. For more detailed information, please refer to Selection Guidelines [PDF 171KB].
＊2：　Based on the max. shaft bores.

Part Number	Stock Bore

More Information

More Information
Model number	N/A
Material	Aluminum Alloy
Characteristics	For High Gain High Vibration-Absorption Zero Backlash
Color	N/A