XGT-C Flexible Coupling

For High Gain
High Vibration-Absorption
Zero Backlash

HK$0.00

Out of stock

For High Gain
High Vibration-Absorption
Zero Backlash

Description

Dimension Drawing

Specs

unit: inch

Part Number	A	L	W	F	G	M	Wrench Torque (lbf in.)	Standard bore diameter D1-D2


XGT-15C	0.591	0.256	0.906	0.085	0.197	M1.6	2.21
XGT-19C	0.748	0.303	1.024	0.104	0.256	M2	4.43
XGT-25C	0.984	0.374	1.26	0.128	0.354	M2.5	8.85
XGT-30C	1.181	0.433	1.417	0.157	0.433	M3	13.27
XGT-34C	1.339	0.472	1.496	0.157	0.482	M3	13.27
XGT-39C	1.535	0.61	1.89	0.177	0.571	M4	22.13
XGT-44C	1.732	0.591	1.89	0.187	0.63	M4	22.13
XGT-56C	2.205	0.768	2.362	0.217	0.787	M5	61.95

Part Number	Max. Bore Diameter (mm)	Keyway Additional Modification Max. Bore Diameter (mm)	Rated Torque＊1 (lbf in.)	Max. Rotational (min-1)	Moment of Inertia＊2 (oz. in.2)	Static Torsional Stiffness (lbf in./deg)	Max. Lateral Misalignment (in.)	Max. Angular Misalignment (°)	Max. Axial Misalignment (in.)	Mass＊2 (oz)



XGT-15C	6	-	9.74	42000	0.015	6.64	0.006	1.5	±0.008	0.28
XGT-19C	8	6	18.59	33000	0.046	13.59	0.006	1.5	±0.008	0.49
XGT-25C	12	9	35.4	25000	0.164	21.62	0.006	1.5	±0.008	0.99
XGT-30C	15	11	55.76	21000	0.377	33.98	0.008	1.5	±0.012	1.59
XGT-34C	16	12	70.8	18000	0.711	60.24	0.008	1.5	±0.012	2.29
XGT-39C	20	15	119.48	16000	1.476	80.32	0.008	1.5	±0.012	3.46
XGT-44C	22	17	159.3	14000	2.296	98.85	0.008	1.5	±0.012	4.8
XGT-56C	28	22	309.75	11000	7.654	231.69	0.008	1.5	±0.012	9.73

＊1：　Adjustment of rated and max. torque specifications for load fluctuations is not required.
However, if operating temperature exceeds 30℃, please adjust rated torque and max. torque as detailed in the table below.
The operational temperature range for XGT is -20℃ to 80℃. For more detailed information, please refer to Selection Guidelines [PDF 171KB].
＊2：　Based on the max. shaft bores.

More Information

More Information
Model number	N/A
Material	Aluminum Alloy
Characteristics	For High Gain High Vibration-Absorption Zero Backlash
Color	N/A