Out of stock
SKU
XGT-1
XGT Flexible Coupling
For High Gain High Vibration-Absorption Zero Backlash
HK$0.00
Out of stock
For High Gain High Vibration-Absorption Zero Backlash
Dimension Drawing
Specs
unit: inch
| Part Number | A | L | W | F | M | Screw Tightening Torque (lbf in.) |
Standard bore diameter D1-D2 |
| XGT-15 | 0.591 | 0.256 | 0.906 | 0.118 | M3 | 6.19 | |
| XGT-19 | 0.748 | 0.303 | 1.024 | 0.157 | M3 | 6.19 | |
| XGT-25 | 0.984 | 0.374 | 1.26 | 0.197 | M4 | 15.04 | |
| XGT-27 | 1.063 | 0.374 | 1.26 | 0.197 | M4 | 15.04 | |
| XGT-30 | 1.181 | 0.433 | 1.417 | 0.217 | M4 | 15.04 | |
| XGT-34 | 1.339 | 0.472 | 1.496 | 0.236 | M5 | 35.4 | |
| XGT-39 | 1.535 | 0.61 | 1.89 | 0.315 | M5 | 35.4 | |
| XGT-44 | 1.732 | 0.591 | 1.89 | 0.295 | M6 | 61.95 | |
| XGT-56 | 2.205 | 0.768 | 2.362 | 0.394 | M6 | 61.95 |
| Part Number | Max. Bore Diameter | Keyway Additional Modification Max. Bore Diameter (mm) | Rated Torque＊1 (lbf in.) |
Max. Rotational Frequency(min-1) |
Moment of Inertia＊2 (oz. in.2) |
Static Torsional Stiffness (lbf in./deg) |
Max. Lateral Misalignment (in.) |
Max. Angular Misalignment (°) |
Max. Axial Misalignment (in.) |
Mass＊1 (oz) |
| XGT-15 | 6 | - | 9.74 | 42000 | 0.014 | 6.64 | 0.006 | 1.5 | ±0.008 | 0.32 |
| XGT-19 | 8 | 6 | 18.59 | 33000 | 0.041 | 13.59 | 0.006 | 1.5 | ±0.008 | 0.53 |
| XGT-25 | 12 | 9 | 35.4 | 25000 | 0.148 | 21.62 | 0.006 | 1.5 | ±0.008 | 1.02 |
| XGT-27 | 14 | 10 | 35.4 | 23000 | 0.197 | 21.62 | 0.006 | 1.5 | ±0.008 | 1.13 |
| XGT-30 | 15 | 11 | 55.76 | 21000 | 0.344 | 33.98 | 0.008 | 1.5 | ±0.012 | 1.62 |
| XGT-34 | 16 | 12 | 70.8 | 18000 | 0.601 | 60.24 | 0.008 | 1.5 | ±0.012 | 2.33 |
| XGT-39 | 20 | 15 | 119.48 | 16000 | 1.312 | 80.32 | 0.008 | 1.5 | ±0.012 | 3.63 |
| XGT-44 | 22 | 17 | 159.3 | 14000 | 2.187 | 98.85 | 0.008 | 1.5 | ±0.012 | 4.69 |
| XGT-56 | 28 | 22 | 309.75 | 11000 | 7.108 | 231.69 | 0.008 | 1.5 | ±0.012 | 9.42 |
＊1： Correction of rated torque and max. torque due to load fluctuation is not required. However, if ambient temperature exceeds 30°C, be sure to correct the rated torque and max. torque with temperature correction factor shown in the following table. XGS's allowable operating temperature is -20°C to 80°C.
＊2： These are values with max. bore diameter.
＊2： These are values with max. bore diameter.
| Model number | N/A |
|---|---|
| Material | Aluminum Alloy |
| Characteristics | For High Gain High Vibration-Absorption Zero Backlash |
| Color | N/A |