Out of stock
SKU
XGT-C
XGT-C Flexible Coupling
| For High Gain High Vibration-Absorption Zero Backlash |
HK$0.00
Dimension Drawing
Specs
unit: inch
| Part Number | A | L | W | F | G | M | Wrench Torque (lbf in.) |
Standard bore diameter D1-D2 |
| XGT-15C | 0.591 | 0.256 | 0.906 | 0.085 | 0.197 | M1.6 | 2.21 | |
| XGT-19C | 0.748 | 0.303 | 1.024 | 0.104 | 0.256 | M2 | 4.43 | |
| XGT-25C | 0.984 | 0.374 | 1.26 | 0.128 | 0.354 | M2.5 | 8.85 | |
| XGT-30C | 1.181 | 0.433 | 1.417 | 0.157 | 0.433 | M3 | 13.27 | |
| XGT-34C | 1.339 | 0.472 | 1.496 | 0.157 | 0.482 | M3 | 13.27 | |
| XGT-39C | 1.535 | 0.61 | 1.89 | 0.177 | 0.571 | M4 | 22.13 | |
| XGT-44C | 1.732 | 0.591 | 1.89 | 0.187 | 0.63 | M4 | 22.13 | |
| XGT-56C | 2.205 | 0.768 | 2.362 | 0.217 | 0.787 | M5 | 61.95 |
| Part Number | Max. Bore Diameter (mm) |
Keyway Additional Modification Max. Bore Diameter (mm) | Rated Torque＊1 (lbf in.) |
Max. Rotational (min-1) |
Moment of Inertia＊2 (oz. in.2) |
Static Torsional Stiffness (lbf in./deg) |
Max. Lateral Misalignment (in.) |
Max. Angular Misalignment (°) |
Max. Axial Misalignment (in.) |
Mass＊2 (oz) |
| XGT-15C | 6 | - | 9.74 | 42000 | 0.015 | 6.64 | 0.006 | 1.5 | ±0.008 | 0.28 |
| XGT-19C | 8 | 6 | 18.59 | 33000 | 0.046 | 13.59 | 0.006 | 1.5 | ±0.008 | 0.49 |
| XGT-25C | 12 | 9 | 35.4 | 25000 | 0.164 | 21.62 | 0.006 | 1.5 | ±0.008 | 0.99 |
| XGT-30C | 15 | 11 | 55.76 | 21000 | 0.377 | 33.98 | 0.008 | 1.5 | ±0.012 | 1.59 |
| XGT-34C | 16 | 12 | 70.8 | 18000 | 0.711 | 60.24 | 0.008 | 1.5 | ±0.012 | 2.29 |
| XGT-39C | 20 | 15 | 119.48 | 16000 | 1.476 | 80.32 | 0.008 | 1.5 | ±0.012 | 3.46 |
| XGT-44C | 22 | 17 | 159.3 | 14000 | 2.296 | 98.85 | 0.008 | 1.5 | ±0.012 | 4.8 |
| XGT-56C | 28 | 22 | 309.75 | 11000 | 7.654 | 231.69 | 0.008 | 1.5 | ±0.012 | 9.73 |
＊1： Adjustment of rated and max. torque specifications for load fluctuations is not required.
However, if operating temperature exceeds 30℃, please adjust rated torque and max. torque as detailed in the table below.
The operational temperature range for XGT is -20℃ to 80℃. For more detailed information, please refer to Selection Guidelines [PDF 171KB].
＊2： Based on the max. shaft bores.
However, if operating temperature exceeds 30℃, please adjust rated torque and max. torque as detailed in the table below.
The operational temperature range for XGT is -20℃ to 80℃. For more detailed information, please refer to Selection Guidelines [PDF 171KB].
＊2： Based on the max. shaft bores.
More Information
Model number
N/A
Material
Aluminum Alloy
Characteristics
For High Gain High Vibration-Absorption Zero Backlash
Color
N/A
Write Your Own Review